WEKO-RK2

WEKO-RK2 is a special product for cleaning components of the process water circuit and has been specially developed for WEKO rotor carriers. WEKO-RK2 must be diluted before use according to the specification below and is used as a cleaning solution in water circuits. WEKO-RK2 dissolves and removes residues and impurities from the system and its components.

Application

The concentration of the cleaning solution depends on the degree of contamination in the system circuit. A good cleaning effect is achieved from a mixing ratio of 1:5. In case of heavy soiling, a mixing ratio of 1:2 is recommended. After rinsing with the cleaning solution, rinse several times with clear water until all residues have been removed. Any filter mats and filter candles remaining in the system must be thoroughly rinsed out, if not better replaced with new ones. For detailed instructions on flushing, refer to the application system instructions for use. We have 20 kg canister sizes available. Other sizes are available on request. WEKO-RK2 gently cleans your WEKO system and you can enjoy the overall quality and function of the system for a long time.

Recommended mixing ratio.

• Light contamination 1:5 (WEKO-RK2 + H2O)

• Heavy soiling 1:2 (WEKO-RK2 + H2O)